Knoll Midifix II

The robust but compact construction of a KNOLL MidiFix II allows the machine to be used in all conditions. The stable frame guarantees a long service life for the machine. The single-axle construction with large wheels makes the machine particularly maneuverable.

The low center of gravity ensures perfect crop pickup by the pickup and excellent maneuverability.

Due to the even weight distribution and the single-axle construction, the MidiFix II has excellent driving characteristics, even when distances need to be covered.

Making a good midi bale starts with proper intake of the base product. Exact and short cut forage is the basic requirement for producing quality silage. The pick-up of the KNOLL MidiFix II with 4 rows of tines ensures maximum intake capacity through its excellent ground adaptation. The steered pick-up with a working width of 1.70 m is equipped with large augers on both sides which ensure an optimum material flow to the rotor, even with wide swaths. In front of the rotor is a mechanically driven crop roller. This ensures excellent compaction of the material and increases the feed capacity.

A quality product can only be delivered when the crop is cut short and effectively.
A 3-star rotor with high intake capacity is built into the feed system. With a diameter of 400mm and welded rows of teeth, the rotor transports large, dry swaths as well as short swaths effectively into the bale chamber.

The rotor feed system of a MidiFix II is designed for optimal feed intake in all conditions.
The hydraulically operated cutting device is located at the bottom of the rotor. The cutting device is equipped with 7 cutting knives. Due to the very small distance between the rotor teeth and the knives, the feed is cut precisely.

A KNOLL MidiFix II is equipped with a net binding system as standard. Optionally, the machine can be equipped with a film binding system. With film binding, net rolls can of course still be installed.
The use of mantelfilm offers substantial advantages for improving silage quality.

With mantel film, the bales become more compact and are better protected by the film layers. Film and film provides an additional oxygen barrier.
The bales can be opened and recycled more easily because the mantelfilm and wrapping film can be removed together as one waste product.

At the center of the machine is the pressing chamber with a size of 85 cm. x 90 cm. The pressing chamber is an important part of the machine. It consists of 14 heavy-duty roller presses which rotate on roller bearings. These rollers have a special profile in order to create the highest possible press density. Directly behind the rotor is the special 'front roller', which ensures an optimal rotation of the bale - regardless of the type of crop being pressed.

The tailgate is equipped with mechanical hooks which keep the press chamber closed during the feeding process and simultaneously ensure the highest possible press density.

The KNOLL MidiFix II is equipped with a wrapping table which drives under the bale chamber at the start of the baling process. As soon as the bale is tied, it is transported to the wrapping position without ground contact. Direct transfer of the bale; fast, clean and without additional loading arm.
Moving the bale is easy, reliable and safe - even on sloping terrain. The bale transfer takes a few seconds, so that downtime is minimal.

The MidiFix II is equipped with a double wrapping arm with two 500 mm film stretch units. The automatic film control immediately stops wrapping when there is an empty roll of wrapping film or when the film tears. One can also continue wrapping with one film roll after this and automatically double the number of wraps.